[JMETER] Hand held motor-operated electric pipe dredging machine

1.This device is very simple operation 2.Effective length is 15meters clear 3. Hand held motor-operated electric pipe dredging

Series electric pipe dredging device for hand-held electric dredging tool, electric shock catch category for class II, moisture-proof categories for the ordinary type, motor categories for the intended string stimulated motor, insulation types for E. The equipment adopts three stage speed reduction device, large torque, low speed characteristics, simple operation, safety.

Technical parameters:

Output power: 750W-1200w

Output voltage: 220V

Output frequency: 50HZ

Diameter scope: 8-180mm any indoor pipeline

Dredging length: = 6M-15M

Application environment:

Indoor pipeline can apply to any

Operating instructions:

Replace the carbon brush: the use of the machine after a period of time, carbon brush abrasion to limit the use of more than 5mm when they need to be replaced

Word screwdriver will also cover removed, remove the wear of carbon brush, the original configuration of the carbon brush mount, then loaded on the back cover.

Loading and unloading flexible shaft with a threaded joint dredge: professional dredge shaft according to the required length is connected with the screw head at one end, clockwise screwing, and tightened. Dismantling dredge Ruanzhou, conversely, can be dismounted to dredge the flexible shaft.

Switch operation: the power plug is inserted into the power socket before, please be sure to check whether it is normal and to release the trigger, whether can return to off position.

To start the tool, as long as the button switch trigger can. Release the switch trigger, tools to immediately stop.

If you want to make the tool of continuous operation, please press the trigger, and then press the lock, lock switch.

Speed governing operation: the user in the use of communication tools, can adjust different speed to satisfy the use requirements. Speed regulator on six stall speed, from low to high," 1" file 6" file: lowest, highest. ( Q7 equipment without this feature )

Operation: Dredge flexible shaft mounted on dredging device, and screw.

Boot check if normal, turn off the switch, to dredge stop, and then inserted into the flexible shaft used for dredging dredging pipeline dredge pipeline plugging, according to distance to determine the length of the flexible shaft flexible shaft, usually slightly longer than the length of block distance.

In the communication process, cannot leave the flexible shaft used for dredging pipeline dredge, otherwise it will cause danger.

Attachment:

1 carbon brush 2

2 open end wrench 1

3 dredge flexible shaft 2 ( according to the models .)

4 dredge soft connection 1 ( according to the models .)

5 dredge cutter ( according to customer requirements can reprovision)

6 dredge brush disc ( according to customer requirements can reprovision)

[JMETER] Hand held motor-operated electric pipe dredging machine